Real FrightLink hardware · Round 2 open

Your props know exactly when to scare.

The real FrightLink Hub and two matching wireless devices

A motion sensor notices the guest. The Hub runs your timing. Every prop hits on cue.

FrightLink turns the Try Me and step-pad animatronics you already own into an automatic, coordinated show—without an operator, loose yard wiring, or internet connection standing by.

Choose a kit — From $149 Check my prop
Works with existing props Wireless around the yard Timed multi-prop scenes Runs locally

Built by the team behind FrightMaps — trusted by 255,000+ haunters.

FrightLink Hub with two compact wireless devices for sensing guests and triggering Halloween props
Hub + two field units. One senses. One triggers. The app tells them apart.

Want build updates and setup tips?
Get production updates, installation guidance, and FrightLink announcements.

FrightLink Control Hub between a Motion Sensor and Wireless Prop Trigger
Production FrightLink hardware: Control Hub, Motion Sensor and Wireless Prop Trigger.
Three pieces. Three obvious jobs.

The names are memorable. The jobs are simple.

1
Motion Sensor — “Ghost”

Place it where guests walk. It detects movement and tells the Hub to begin.

2
Control Hub — “Hub”

Plug it in once. It stores your scene and sends each cue at the right time.

3
Wireless Prop Trigger — “Executioner”

Plug it into a prop's Try Me jack when that prop is too far from the Hub for a cable.

Why do Ghost and Executioner look alike? They intentionally share the same rugged enclosure. Their assigned role in the FrightMaps app tells you whether that unit senses a guest or triggers a prop.

60-second compatibility check

Will FrightLink work with my prop?

Look for a port labeled Try Me, Step Pad, or External Trigger. Tell us what you have and we will point you to the smallest kit that fits.

Real hardware. Real props.

Watch FrightLink run an actual haunt.

These short field demos show the real event chain: a sensor detects movement, the Hub runs its assigned scene, and connected animatronics react.

🔥 NEW — our best yet
Our best demo yet

See FrightLink turn a yard into a coordinated scare — real hardware, real reactions.

Automate a haunt wirelessly

Follow a visitor event from Ghost detection through Hub scene logic to a real prop.

Turn a standard prop into a smart prop

Add repeatable automation to the animatronics you already own.

The real system in action

A live FrightLink hardware test, not a concept animation.

“

I was running wires everywhere, wiring up PIR sensors, clicking a remote because no one ever gets close enough to trigger anything. FrightLink solved so many problems in one box — my visitors trigger the animatronics themselves from the sidewalk.

— Garrick H. · early FrightLink haunter · Reading, PA

First Run Sold Out — Round 2 Open

Choose how you want to scare.

Start wired, automate one scene, add a wireless prop, or cover the whole yard. The names describe what each kit does.

Round 2 orders open · Next production run
Round 2 pricing is shown below.

Wired Starter

Run nearby props from one Hub

$149
  • 1× Hub
  • Setup kit + cable
  • Runs 3 wired props OR 1 Try Me button + 2 wired props
  • Expand with wireless sensors anytime

Automatic Scene Kit

Wireless motion-triggered first scene

$229
  • 1× Hub
  • 1× Ghost wireless motion sensor
  • Detects guests and starts your assigned scene
  • Runs up to 3 nearby wired props from the Hub
  • Setup kit + cable
Best value

Wireless Prop Kit

One automatic scene + one remote prop

$299
  • 1× Hub
  • 1× Ghost wireless motion sensor
  • 1× Executioner wireless prop trigger
  • Detects a guest and starts the scene automatically
  • Setup kit + cable

Whole Yard Kit

Three zones + three wireless props

$615
  • 1× Hub
  • 3× Ghost wireless motion sensors
  • 3× Executioner wireless prop triggers
  • Creates 3 automatic scare zones
  • Setup kit + cable

Your Cart — Wireless Prop Kit

Hub + Motion Sensor (“Ghost”) + Wireless Prop Trigger (“Executioner”)

First run sold out — this order reserves your spot in Round 2, built in the next production run. Retail pricing returns after launch.

Wireless Prop Kit $299.00
Shipping $12.99
Total $311.99

Add more to your kit

COMING SOON 🔋 Battery Upgrade — double your battery 6000mAh (2× the standard battery) + USB-C cord. Works with Ghost and Executioner. Coming soon.

Most haunts grow over time — add another sensor for a new zone, or another Executioner to fire one more prop.

Poltergeist Coming soon
Round 2 production $12.99 US shipping 14-day returns Setup help included

Already have a Hub?

Wireless Prop Trigger 4-Pack

4× wireless relays, no Hub. For expanding existing setups.

$269
🔋 Battery Upgrade COMING SOON

6000mAh double battery + USB-C cord. Works with any sensor or Executioner.

Coming soon

🚚 Flat rate shipping: $12.99 (US only)

📅 Round 2: built in the next production run

💳 Cards are charged at checkout to reserve your spot in Round 2.

↩️ 14-day returns after delivery. View return policy

Production FrightLink hardware shown above.

Questions

Frequently Asked

FrightLink uses its own dedicated wireless mesh between the Hub, sensors, and Executioners — built for low latency and reliability in noisy haunt environments. Bluetooth is only used briefly during initial Hub setup with the FrightMaps app.
Yes. If your prop has a try-me button or 3.5mm step-pad input, an Executioner can connect it to the Hub. When Ghost reports visitor movement, the Hub runs the assigned scene and sends that Executioner its scheduled output cue. No replacing your prop or its built-in program.
Choose Wired Starter for nearby wired props. Choose Automatic Scene Kit when you want a motion sensor to begin one complete scene. Choose Wireless Prop Kit when that scene includes a prop too far from the Hub for a cable. Whole Yard Kit starts with three sensor zones and three wireless prop outputs.
No. The core path — visitor movement → Ghost event → Hub scene logic → wired output or Executioner — works locally without internet or a phone standing by. Remote status, backups, updates, and off-property test tools require Hub WiFi.
Up to 600 ft line of sight between the Hub and any device under ideal conditions, with mesh hops extending coverage further. Typical real-world range is 100-300 ft depending on walls, fences, and metal between devices. For whole-yard haunts we recommend placing the Hub centrally.
Yes. Assign each Ghost to a separate Hub scene: movement at Sensor A can run Scene A while movement at Sensor B runs Scene B, even in the same room. Sensors report events to the Hub; they do not directly activate every nearby prop or communicate with Executioners themselves.
Your hardware keeps working locally. Ghost events, Hub scene logic, and scheduled outputs continue running. Remote status, off-property testing, and cloud backup pause until you resume.
Sensors and Executioners run on a 3000mAh LiPo. In typical Halloween-night use (deep sleep between triggers) you'll get a full evening on a single charge, with battery life depending on trigger frequency and sensor type. We recommend topping off the day of.
Yes, FrightLink is designed for sheltered outdoor haunt setups. The hardware uses IP-rated components, conformal-coated PCBs, and gasketed enclosures to help resist moisture. The assembled devices are weather-resistant, not waterproof, so place them under a porch, overhang, or weather cover. Do not leave them in direct rain or submerge them.
FrightLink hardware may be returned within 14 calendar days after delivery. Contact sales@frightlink.com before sending anything back. Standard returns must be complete and undamaged; the customer pays return shipping and original shipping is non-refundable. If an item arrives defective, damaged, or incorrect, contact us within 14 days and FrightLink will cover return or replacement shipping. Read the full policy.
The first production run sold out. Orders placed today reserve a place in Round 2, which will be built in the next production run. You will receive a firm ship date by email as soon as boards land and tracking when the order ships.